Making your own DIY nipple toys at home is a challenging and fun project. You can customize DIY nipple sex toys at home for a different kind of pleasure and to explore new stimulation. In this DIY guide, we go over the materials you’ll need to make it and the detailed steps to make your own nipple sucker. The exact method of making them is tried and tested and widely available. These devices can also actually be used on the clitoris and can provide unique and pleasurable sensations.
Homemade Nipple Suckers: A Step-by-Step Guide
1. Syringe Nipple Suckers
Step 1: Gathering materials
The first step is to buy some syringes, which are readily available in most places. 10ml-60ml syringes seem to be the ideal size range, but check to see which one suits you better. If syringes are not readily available in your area, you can go online or try a professional woodworking supplier for some. They are very cheap.
1 syringe of about 10-60ml
1 sharp knife or scissors
Step 2: Modifying the syringe
First disassemble the syringe and carefully remove the needle from the syringe.
Use a sharp knife or scissors to carefully snip or cut off the tip portion of the syringe. This will ensure that the device is safe and comfortable for subsequent use.
Step 3: Generating a vacuum
Next, drill several good-sized holes in the plunger rod. Drilling holes about halfway down the plunger and 3/4 of the way down the length of the plunger works best. These holes will allow air to escape and create suction when the plunger is reinserted.
Afterward, reinsert the plunger backward. The top will have a smooth surface and more contact for a better seal.
After pulling the suction, you only need a safety pin through the hole to hold the plunger in place. This will hold the suction and maintain pressure. Holding it in this position for a few minutes will create a vacuum.
Step 4: Apply Lubricant
An airtight seal can be obtained by applying a thick gel lubricant. If you do this properly, they should hold for a long time – 30 minutes or more.
Safety tips
Always use a clean and hygienic syringe.
Avoid excessive pressure to prevent damage to delicate body tissues.
2. Glass Bottle Nipple Suckers
There are some safety steps for using glass vials
First, heat the tip of the glass bottle indistinguishably with hot water.
Then, gently place it over the nipple area.
The air inside the bottle will naturally create suction as it gradually cools.
Be careful
Always make sure that the opening of the bottle is wide enough to fit very comfortably over the nipple.
Be extremely careful when using the bottle and never break the glass.
The right temperature is also very important
If the top of the bottle is overheated, let it cool gradually and wait until it is at the right temperature before applying it to the nipple.
Always avoid the potential risk of glass fragments becoming lodged in the skin.
Safety and use tips
Sterilization
Ensure thorough cleaning and disinfection before re-use to avoid infection.
Gradual progression
Start gradually with low suction and then slowly increase the suction to find the best level of comfort and pleasure for you.
Monitoring
Always be aware of any discoloration of the skin or signs of physical discomfort. If there is any pain or unusual sensations in your body, pause immediately.
Alternatives to DIY Nipple Suckers
While DIY nipple suckers are a fun and inexpensive alternative to exploring new sensations, commercially available products are far safer and more effective. Here are some alternatives:
Commercial nipple suction cups
These specialized toys are designed with safety in mind, and there are involved in having a variety of sizes and strengths to meet the preferences and needs of different users.
Nipple pumps
These devices use a pump mechanism to create a powerful suction, providing a more controlled and adjustable stimulation experience.
Nipple vibrators
They can combine suction and vibration to provide dual stimulation that can significantly enhance pleasure.
Why is it better to use commercial products?
Manufacturing quality
Professional nipple suction cups are carefully crafted using safe and reliable materials along with a variety of safety features to minimize the potential for bodily harm or injury.
Comfort
Carefully selected safety materials provide a more comfortable touch, while the specialized design provides a more natural fit to the body.
Additional features
Some premium products even have additional advanced features such as vibration and app control, allowing users to enjoy more functionality and a more pleasurable sexual experience.
Conclusion
Do It Yourself DIY Nipple Suckers at home are actually very easy to make and can be achieved by following a few simple steps. These homemade toys can also bring a different kind of fun to the bedroom compared to store-bought professional toys. However, it is still recommended to buy professional toys for long-term use for better safety and functionality.
Always remember to prioritize safety and comfort, and always maintain open and fluid communication with your partner so that both partners can have a safe and pleasurable experience.
